Documentation

Wind Sensor Calibration and the Wind Tunnel

We’ve been selling a little wind sensor, which has found its way into lots of hobbyist projects and even some “harder” science projects including one by the US EPA, but...

Using the Lots of Pots Board for Raspberry Pi

Using the Lots of Pots Board for Raspberry Pi Here’s how to use the Lots of Pots Board for the Raspberry Pi. The daughterboard (or shield; what are we calling...

Getting Started with the Fluxamasynth-32

Unleash your flow with the Fluxamasynth 32 This beauty has been designed to make your music raise the roof! At Modern Device we are ahead of the game and have...

Getting Started with the Fluxamasynth Shield

The Fluxamasynth is a programmable synthesizer in an Arduino shield format. The Arduino sends MIDI commands to the ATSAM2695 IC on the shield, which generates stereo line level audio out....

Fluxamasynth Arduino Library Reference

Download the latest version of the library from Github at https://github.com/fluxly/Fluxamasynth. The Command Set Fluxamasynth()Fluxamasynth(byte rxPin, byte txPin)fluxWrite(byte c)fluxWrite(byte *buf, int cnt)noteOn(byte channel, byte pitch, byte velocity)noteOff(byte channel, byte pitch)programChange(byte bank,...

Dimensional data for the Rev P Wind Sensor

Modern Device >> Some customers had requested the dimensional data of the Wind P sensor so I put this together. These dimensions apply to Wind P versions P4, P5 and...