New Product: Hobby Servos!


Paul picked these servos up for his class, and liked them so much that we are now putting them in stock!


This is a standard analog hobby servo with nylon gears. It also features 2 ball bearings on the main output shaft. Ball bearings are rare on inexpensive “generic” servos, so this is definitely a nice feature to see.

The specs on the servo are:

  • Torque: 83.47 in * ounces(6.0kg*cm) @ 5 volts
  • Speed: 60 degrees in 0.16 seconds @ 5 volts
  • Weight: 1.41 ounces (40g)
  • Dimensions: 40.8 x 20.1 x 38.0mm


It runs on a standard standard servo interface (yellow-red-brown).

  • brown: ground
  • red: 4.8 – 6 volts
  • yellow: signal from servo controller or microcontroller (eg Arduino)

The new BBLeo has a super easy interface to get a servo up and running – just make sure you use a 5 or 6 volt supply on the external input.

The servo comes with a nice variety of arms, and mounting hardware.


We’re giving away the first 15 servos, one to an order. Let’s say two to any one customer too.

By Sebastian on March 20, 2013.