Search found 4 matches

by PennyLane
Sun Apr 22, 2012 6:59 am
Forum: Connecting to BBB, RBBB
Topic: avrdude: stk500_recv(): programmer is not responding
Replies: 5
Views: 10891

Re: avrdude: stk500_recv(): programmer is not responding

I finally fixed it. The error was that I soldered the header pins of the RBBB onto another board because my RBBB is part of a larger project. This is where I connected 5V and RX (which is actually TX there).

Lessons learnt: Think before you solder :lol:
by PennyLane
Sun Apr 22, 2012 3:04 am
Forum: Connecting to BBB, RBBB
Topic: avrdude: stk500_recv(): programmer is not responding
Replies: 5
Views: 10891

Re: avrdude: stk500_recv(): programmer is not responding

Yes, I meant it shows 0 ohm when I measure 5V against RX. So the problem seems to be somewhere around there.
by PennyLane
Sat Apr 21, 2012 6:45 am
Forum: Connecting to BBB, RBBB
Topic: avrdude: stk500_recv(): programmer is not responding
Replies: 5
Views: 10891

Re: avrdude: stk500_recv(): programmer is not responding

Hi,

I tried the Duemilanove setting, no success.

I checked the solder joints on my board and found that 5V and RX are connected. Could it be that this is causing my problem or is it OK?
by PennyLane
Wed Apr 11, 2012 3:42 pm
Forum: Connecting to BBB, RBBB
Topic: avrdude: stk500_recv(): programmer is not responding
Replies: 5
Views: 10891

avrdude: stk500_recv(): programmer is not responding

Hi, I get the error " avrdude: stk500_recv(): programmer is not responding" when I try to upload sketches to my RBBB. I'm using an USB-BUB II to connect and am on a Core 2 Duo MacBook with MacOSX 10.5.8. I have installed the FTDI drivers. My settings in the Arduino software are /dev/tty.usbserial-A9...