Fluxamasynth alternate MIDI input

Interfacing hardware, sensors, output drivers, chips.
Post Reply
Posts: 1
Joined: Fri Feb 11, 2011 12:04 pm

Fluxamasynth alternate MIDI input

Post by odbasta » Fri Feb 11, 2011 12:10 pm


I see there is an alternate input for MIDI on the Fluxamasynth shield. It looks like digital input 4 from the picture (can't find a schematic for the shield).

Anyway, do you guys have code to enable that on the Arduino? Is it just a bit-banged output from there?

It would be nice to use this input because it frees up the serial port for debugging on the main board.



Posts: 2
Joined: Sat Jul 23, 2011 11:54 am

Re: Fluxamasynth alternate MIDI input

Post by larsi » Sat Jul 23, 2011 12:02 pm

Check out Arduino's SoftSerial: http://www.arduino.cc/en/Reference/SoftwareSerial You have to change the Fluxamasynth library though - it has the hardware serial hard coded...

Site Admin
Posts: 741
Joined: Mon May 12, 2008 4:19 pm

Re: Fluxamasynth alternate MIDI input

Post by paul » Sat Oct 01, 2011 8:25 pm

Just in case you missed the announcement above - here's the SoftwareSerial Library

http://wiki.moderndevice.com/pmwiki.php ... istMethods


Post Reply