Fluxamasynth Shield information

Interfacing hardware, sensors, output drivers, chips.
Post Reply
Lemorlenny
Posts: 3
Joined: Wed Mar 30, 2011 6:45 am

Fluxamasynth Shield information

Post by Lemorlenny » Wed Mar 30, 2011 6:54 am

HI, I have finally received my Fluxamasynth Shield, but I have not understand if I can supply Fluxamasynth Shield directly stacking on Arduino and if I need another USB adapter to program it. In the photo on the site any of this accessory appear, even on stacked Arduino pics.
Somebody can explain me this'?

Many thanks

Lenny

Lemorlenny
Posts: 3
Joined: Wed Mar 30, 2011 6:45 am

Re: Fluxamasynth Shield information

Post by Lemorlenny » Wed Mar 30, 2011 2:03 pm

I solved myself, thanks anyway.

ogre_lawless
Posts: 2
Joined: Mon May 23, 2011 7:38 pm

Re: Fluxamasynth Shield information

Post by ogre_lawless » Mon May 23, 2011 7:46 pm

Its through the shield. Shield will also grab pins 1 or 4 depending on how its jumped (1 as mine showed up) and looks like if you stack the wind pressure sensor up against it (and maybe the accelerometer?) it'll take up A0 as well.

Post Reply