BBB Not uploading

Problems uploading, serial connections, BUBs, P4, FTDI cables, etc
Post Reply
snackers
Posts: 1
Joined: Thu Mar 01, 2012 3:37 pm

BBB Not uploading

Post by snackers » Thu Mar 01, 2012 3:52 pm

Just got the BB kit w/BUB and the LCD117 (which was assemble). I have been trying to up load a few of the examples in the Ardruino 1.0 IDE without success from both my Mac and XP computers. In the IDE I have the board set to Ardruino Duemilanove w/ATmega328.

The Mac gave an error:
arvdude: stk500_getsync(): not in synch: resp=0x30
XP gives:
arvdude: stk500_getsync(): not in synch: resp=0x00

Does the BUB have little LEDs on it that are supposed to flash during transfer? Mine certainly are not. Also the power/reset LED on my board has started to act funky and does not come on after a reset or sometimes does not flash after reset. I don't see any bad solders.

paul
Site Admin
Posts: 734
Joined: Mon May 12, 2008 4:19 pm

Re: BBB Not uploading

Post by paul » Thu Mar 08, 2012 4:33 pm

Try the UNO setting on Boards menu - We've been shipping Optiboot lately.

Paul

Post Reply