FCC issues with Jeenode

Discussion of Jee Products and Wireless Tech
Post Reply
skaterdad
Posts: 1
Joined: Tue Apr 09, 2013 8:24 pm

FCC issues with Jeenode

Post by skaterdad » Wed Apr 10, 2013 7:49 am

Has anyone done any radiated emmission measurements on the RF12B + 1/4 wave wire antenna to see how far above/below the FCC limits are? I am contemplating a STA (Special Temporary Authority) request to the FCC to use a multitude of these devices for a few tests but don't have the proper measurement equipment handy to fill out the paperwork.

Also: Anyone have any issues with Jeenode serial port at 115200? I've got it hooked to a another device and can't get it to communicate though my scope says bits are flowing. More details-- see my inquiry here.. http://jeelabs.net/boards/7/topics/1748 (sorry for the cross-post).

Thanks for listening and any responses...

MichaelKerenads
Posts: 1
Joined: Wed Mar 15, 2017 10:58 am

FCC issues with Jeenode

Post by MichaelKerenads » Thu Mar 30, 2017 9:28 pm

It can be done with the Sundstrand hydro, but I dont know at all about the Eaton. What cubic inch is that Perkins?

Post Reply