Page 1 of 1

Pulse Sensor Code updated with HB & PSO2 readings

Posted: Mon Sep 23, 2013 4:24 pm
by paul
I coded up an example that outputs heartbeat, signalsize and PSO2 readings from the Modern Device pulse sensor.
The code is all here: https://github.com/moderndevice/SI1143_ ... ox_Sensors

Re: Pulse Sensor Code updated with HB & PSO2 readings

Posted: Wed Feb 10, 2016 6:11 pm
by internetizen
Thanks for your examples. Can you please elaborate how you use the high frequency and low frequency outputs to find the beat?
It seems that you used the high filterVal to get the high frequency and the low one for the low frequency. This is the part I don't understand.
Thanks

Re: Pulse Sensor Code updated with HB & PSO2 readings

Posted: Thu May 19, 2016 9:20 am
by sx3374
Why not display the value of 98% oxygen

Re: Pulse Sensor Code updated with HB & PSO2 readings

Posted: Thu May 19, 2016 9:24 am
by sx3374
Why not display the value of 98% oxygen

Pulse Sensor Code updated with HB PSO2 readings

Posted: Thu Sep 28, 2017 5:43 pm
by Michaelkfyif
Hey
I purchased the Pulse Oximeter.
the outputs are HR and SpO2, I was wondering if i can receive from it also the pleth?
Thank you
Zohar

Pulse Sensor Code updated with HB PSO2 readings

Posted: Sun Oct 08, 2017 6:42 pm
by Remilqdmv
Hey
I purchased the Pulse Oximeter.
the outputs are HR and SpO2, I was wondering if i can receive from it also the pleth?
Thank you
Zohar

Pulse Sensor Code updated with HB PSO2 readings

Posted: Mon Oct 09, 2017 4:24 pm
by Michaelkfyif
Hey
I purchased the Pulse Oximeter.
the outputs are HR and SpO2, I was wondering if i can receive from it also the pleth?
Thank you
Zohar