Wind Sensor Followup

Questions about Modern Device and JeeLabs Sensors
Post Reply
Vicengineer
Posts: 1
Joined: Thu Nov 19, 2015 10:17 pm

Wind Sensor Followup

Post by Vicengineer » Thu Nov 19, 2015 10:26 pm

Hi Paul,

I'm interested in using your Wind Sensor Version P for a large engineering project. I'm writing this post to query you about the development of the product.

Are still developing it?

Have you spent any further time looking for PTC thermistors in order to reduce the input voltage range requirement?

Do you have any experience using the sensor in outdoor environments? What is sensitivity to moisture?

Have you done any testing to compare the linearity and measurement deviation between multiple sensors or subsequent batches? I ask this question because I could be possibly implementing an array of 20 or 30 of these sensors and I would need the sensors to be within 5% of each others readings.

BTW good work on the project, this is the only inexpensive wind speed sensor I have been able to find. Originally I was looking for a simple rotary vane sensor with a magnetic pickup, similar to the ones used in low cost anemometers but for the life of me I can't seem to find a standalone sensor for sale anywhere on the internet.

paul
Site Admin
Posts: 706
Joined: Mon May 12, 2008 4:19 pm

Re: Wind Sensor Followup

Post by paul » Fri Dec 02, 2016 7:10 pm

Vicengineer,

If you're still listening, maybe call us if you haven't already.

Paul

Fredaueuv
Posts: 5
Joined: Tue Sep 19, 2017 8:43 pm

Wind Sensor Followup

Post by Fredaueuv » Tue Sep 26, 2017 9:33 pm

Updated January 2016

NOTE: ON NEWTONS WITH THE GREEN WIND VANE, REMOVE THE WIND VANE BEFORE INSTALLING THE REMOTE WIND SENSOR

Dudemhccv
Posts: 9
Joined: Wed Sep 20, 2017 12:42 am

Wind Sensor Followup

Post by Dudemhccv » Sun Oct 01, 2017 8:30 am

Updated January 2016

NOTE: ON NEWTONS WITH THE GREEN WIND VANE, REMOVE THE WIND VANE BEFORE INSTALLING THE REMOTE WIND SENSOR

Michaelchase
Posts: 7
Joined: Tue Sep 19, 2017 4:04 am

Wind Sensor Followup

Post by Michaelchase » Mon Oct 09, 2017 1:34 pm

Updated January 2016

NOTE: ON NEWTONS WITH THE GREEN WIND VANE, REMOVE THE WIND VANE BEFORE INSTALLING THE REMOTE WIND SENSOR

Post Reply