The Arduino Uno is the latest revision of the popular Arduino open-source electronics prototyping platform, based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter.
That’s right, folks, the Arduino Uno features not one, but two Atmel microcontrollers.
It also runs a bootloader, Optiboot, which takes up 1.5kb less space than STK500 (the previous bootloader) and runs at twice the speed (for faster sketch uploading).
- 14 I/O pins
- 6 PWM
- 6 Analog
- 32kB Flash Memory
- 2kB RAM
- Comes with USB A-B cable