The Rev P wind sensor has hardware compensation for ambient temperatures, unlike our Rev C wind sensor. The “P” is somewhat arbitrary, but can also stand for positive temperature coefficient thermistors. The thermistors used on this model are more stable and more absolutely accurate than the thermistors on the Rev C, which are NTC thermistors. As with everything in engineering, the new thermistors have good and back effects. Because we can’t buy the PTC thermistor in an ideal value, it requires a higher voltage to heat the sensing element up to operating temperature. Thus the sensor needs an 8 volt supply. Another downside is that the thermistors are dramatically more expensive than our Rev C. sensor. One pleasant side-effects of the increased voltage is that there is plenty of power to heat up the thermistor, so the sensor can sense hurricane force winds without saturating (going to a flat maximum value). It does not necessarily mean the sensor can survive hurricane force winds however. The new mounting of the thermistor sensing element means that the Rev P is much less directionally sensitive than the Rev C. sensor. Perhaps in the 15% range. The sensor should also be physically more robust than our older sensor due to the loop that holds the sensing element. Another new feature of the sensor is a dedicated ambient temperature sensor that is independent of supply voltages. The temp sensor analog output is also scaled to 3.3 volts. The voltage (wind) output of the sensor has also been scaled to a maximum 3.3V output with high precision (.1% resistors). This is to accommodate the increasing use of 3.3 volt boards, and microcontrollers. It will work great with any Arduino or clone, right out of the box – except for the fact that you need to provide at least 8 volts from an external power source.
The Rev P Wind Sensor is now available through our UK-based partner Digital Smarties. Non-US customers can order them here.
- Supply voltage: 10-12 volts
- Current: ~40mA – increases a bit with higher wind speeds
- Wind Speeds Measured: 0-150 MPH
- Ambient temperature compensation