Pulse/Heartbeat SensorSKU: MD0570
This is a heartbeat / pulse / PSO2 sensor based on a Silicon Labs Si1143 chip. The chip wasn't exactly designed for a pulse sensor but since we developed this sensor Silicon Labs has gone on to market the chip for that application, and it is used in several commercial applications. These include variable LED control for three LEDs and two photodiode detectors.
The chip has a boatload of controls for controlling the LED pulsewidth, the LED current and which LEDs are on during which particular measurement. We've got a library for the sketch and demos for Arduino and Processing. The board is outfitted with two infrared LEDs and one red LED, for sensing of visible red light. The two frequencies are necessary for sensing and calculating the oxygen saturation in blood.
The pinout can easily be connected with wires to any Arduino or other microcontroller. The pulse sensor, with only slightly tweaked software, also makes an awesome close range (0-8") infrared proximity detector. Unlike the Sharp infrared sensors, the SI1143 based sensor has no dead zone close in the output. The current draw is also less than the Sharp sensor, and entirely under user control, through the I2C interface. Note that competing pulse sensors which typically use one op amp, have no software control over the LED, or sensor sensitivity at all.
Specifications 1.26" x .8" (32mm x 22mm)